| Home | E-Submission | Sitemap | Editorial Office
top_img
       
REVIEW PAPER 2015 February 24
Nanograins in Electrospun Oxide Nanofibers
Oxide nanofibers synthesized by the electrospinning method have received considerable attention owing to their potential applications in various fields. This paper provides an overview of the growth behavior and the importance of the presence of nanograins in oxide nanofibers sy...
ORIGINAL ARTICLE 2015 February 24
Surface Analysis, Microstructural, Mechanical and Electrochemical Properties of New Ti-15Ta-5Zr Alloy
This paper describes the synthesis of a novel Ti-15Ta-5Zr alloy with an α + β stable, homogeneous, biphasic microstructure (by optical microscopy, X-ray diffraction and scanning electron microscopy) and the determination of its mechanical properties, hardness and a Young’s mo...
ORIGINAL ARTICLE 2015 February 24
Grain-Structure Evolution of Brazing-Treated A4343/A3003/A4343 Aluminum Brazing Sheets Rolled with Different Reductions
The grain-structure evolution of three-layered A4343(clad)/A3003(core)/A4343(clad) aluminum brazing sheets was studied by means of electron backscatter diffraction. Three different samples were prepared by cold rolling with 17%, 22%, and 44% reduction, and the brazing treatment ...
ORIGINAL ARTICLE 2015 February 24
Deformation Behaviour of Rheocast A356 Al Alloy at Microlevel Considering Approximated RVEs
A micromechanical approach is considered here to predict the deformation behaviour of Rheocast A356 (Al-Si-Mg) alloy. Two representative volume elements (RVEs) are modelled in the finite element (FE) frame-work. Two dimensional approximated microstructures are generated assuming...
ORIGINAL ARTICLE 2015 February 24
Pulsed Current Activated Synthesis and Rapid Consolidation of a Nanostructured Mg2Al4Si5O18 and Its Mechanical Properties
Nanocrystalline materials have received much attention as advanced engineering materials, with improved mechanical properties. Attention has been directed to the application of nanomaterials, as they possess excellent mechanical properties (high strength, high hardness, excellen...
ORIGINAL ARTICLE 2015 February 24
Flame-Resistant Ca-Containing AZ31 Magnesium Alloy Sheets with Good Mechanical Properties Fabricated by a Combination of Strip Casting and High-Ratio Differential Speed Rolling Methods
This study reported that a combination of strip casting and high-ratio differential speed rolling (HRDSR) can produce flame-resistant Mg alloy sheets (0.7 wt%Ca-AZ31: 0.7Ca-AZ31) with good room-temperature mechanical properties and high-temperature formability. HRDSR effectively...
ORIGINAL ARTICLE 2015 February 24
Finite Element Analysis of Compressive Behavior of Hybrid Short Fiber/Particle/Mg Metal Matrix Composites Using RVE Model
The compressive behavior of hybrid short fiber/particle composites was examined by using finite element analysis and representative volume element models for two different particle shapes. The realistic, random and complex distributions of the short fibers and particles were rec...
If anyone registers his/her email address, he or she will receive the email of notification when new paper is published in the web site of METALS AND MATERIALS International. Since it is open access journal, the full text is freely available.
Please Sign up.
Current Issue
Volume 21(2); Feb 2015
RSS feed
Review paper
213 Nanograins in Electrospun Oxide Nanofibers
Akash Katoch, Sun-Woo Choi, Sang Sub Kim
METALS AND MATERIALS International . 2015;21(2):213-221.   Published online 2015 February 24
Original Articles
222 Precipitation of β-NiAl/Laves Eutectics in a Ru-containing Single Crystal Ni-Based Superalloy
Xipeng Tan, Yu Jun Tan, Jinlai Liu, Tao Jin
METALS AND MATERIALS International . 2015;21(2):222-226.   Published online 2015 February 24
227 Determination of the Deformation Mechanism of Fe-Mn Alloys
Minho Jo, Yang Mo Koo, Se Kyun Kwon
METALS AND MATERIALS International . 2015;21(2):227-231.   Published online 2015 February 24
232 Alloying Effect of Copper on the Corrosion Properties of Low-Alloy Steel for Flue Gas Desulfurization System
Seon-Hong Kim, Sun-Ah Park, Jung-Gu Kim, Kee-Sam Shin, Yinsheng He
METALS AND MATERIALS International . 2015;21(2):232-241.   Published online 2015 February 24
242 Surface Analysis, Microstructural, Mechanical and Electrochemical Properties of New Ti-15Ta-5Zr Alloy
Cora Vasilescu, Silviu Iulian Drob, Petre Osiceanu, Paula Drob, Jose Maria Calderon Moreno, Silviu Preda, Steliana Ivanescu, Ecaterina Vasilescu
METALS AND MATERIALS International . 2015;21(2):242-250.   Published online 2015 February 24
251 High Temperature Oxidation Behaviour of Ferritic Stainless Steel SUS 430 in Humid Air
Xiawei Cheng, Zhengyi Jiang, Dongbin Wei, Jingwei Zhao, Brian J. Monaghan, Raymond J. Longbottom, Laizhu Jiang
METALS AND MATERIALS International . 2015;21(2):251-259.   Published online 2015 February 24
260 Analysis of the Residual Stress in Zirconium Subjected to Surface Severe Plastic Deformation
Yaomian Wang, Huanping Yang, Conghui Zhang, Fei Yu
METALS AND MATERIALS International . 2015;21(2):260-269.   Published online 2015 February 24
270 Fabrication of Al2O3 Dispersion Strengthened Copper Alloy by Spray In-Situ Synthesis Casting Process
Sang-Jo Han, Jeonghyuk Seo, Kyeong-Hwan Choe, Myung-Ho Kim
METALS AND MATERIALS International . 2015;21(2):270-275.   Published online 2015 February 24
276 Grain-Structure Evolution of Brazing-Treated A4343/A3003/A4343 Aluminum Brazing Sheets Rolled with Different Reductions
Su-Hyeon Kim, Joo-Hee Kang, Kwangjun Euh, Hyoung-Wook Kim
METALS AND MATERIALS International . 2015;21(2):276-285.   Published online 2015 February 24
286 Experimental Determination of Interfacial Energies for Solid Sn in Equilibrium with Sn-Mg-Zn Liquid
Yemliha Altıntas, Esra Ozturk, Sezen Aksoz, Kazım Keslioglu, Necmettin Maraslı
METALS AND MATERIALS International . 2015;21(2):286-294.   Published online 2015 February 24
295 Analysis of the Origin of Periodic Oscillatory Flow in the Continuous Casting Mold
Jun-young Lee, Yong-tae Kim, Kyung-woo Yi
METALS AND MATERIALS International . 2015;21(2):295-302.   Published online 2015 February 24
303 Numerical Simulation of Continuous Casting Process of Different Steel Grades Considering Solidification and Mixing of Different Steel Grades
Myunggeun Jeong, Changyoung Choi, Man Yeong Ha, Sung Jool Kim, Joong Kil Park, Kyung Shik Oh
METALS AND MATERIALS International . 2015;21(2):303-310.   Published online 2015 February 24
311 Deformation Behaviour of Rheocast A356 Al Alloy at Microlevel Considering Approximated RVEs
Sk. Tanbir Islam, Prosenjit Das, Santanu Das
METALS AND MATERIALS International . 2015;21(2):311-323.   Published online 2015 February 24
324 Synthesis of YAG:Ce3+ Phosphor Powders Employing Several Types of Alumina Seeds
A-Reum Kim, Yong-Hyeon Kim, Sang-Jin Lee
METALS AND MATERIALS International . 2015;21(2):324-329.   Published online 2015 February 24
330 CO Gas-Sensing Properties of CuO-TiN and CuO-TiN-TiO2 Prepared by Controlled Oxidation of Cu-TiN Composites
Je-Shin Park, Chae-Hun Lim, Young-Ki Cho, Yeon-Tae Yu
METALS AND MATERIALS International . 2015;21(2):330-336.   Published online 2015 February 24
337 Self-Consolidation Mechanism of Porous-Surfaced Ti Implant Compacts Induced by Electro-Discharge-Sintering of Spherical Ti Powders
Y. H. Jo, Y. H. Kim, Y. J. Jo, J. G. Seong, S. Y. Chang, P. J. Reucroft, S. B. Kim, W. H. Lee
METALS AND MATERIALS International . 2015;21(2):337-344.   Published online 2015 February 24
345 Pulsed Current Activated Synthesis and Rapid Consolidation of a Nanostructured Mg2Al4Si5O18 and Its Mechanical Properties
In-Jin Shon, Hyun-Su Kang, Jung-Mann Doh, Jin-Kook Yoon
METALS AND MATERIALS International . 2015;21(2):345-349.   Published online 2015 February 24
350 Effects of Heat Input on the Pitting Resistance of Inconel 625 Welds by Overlay Welding
Jun Seok Kim, Young IL Park, Hae Woo Lee
METALS AND MATERIALS International . 2015;21(2):350-355.   Published online 2015 February 24
356 Simulation and Sensitivity Analysis of Controlling Parameters in Resistance Spot Welding
Euiwhan Kim, Thomas W. Eagar
METALS AND MATERIALS International . 2015;21(2):356-364.   Published online 2015 February 24
365 Research on the Effect of Flow Stress Calculation on Aluminum Alloy Sheet Deformation Behavior Based on Warm Bulging Test
Gaoshen Cai, Lihui Lang, Kangning Liu, Sergei Alexandrov, Dongxing Zhang, Xiying Yang, Chan Guo
METALS AND MATERIALS International . 2015;21(2):365-373.   Published online 2015 February 24
374 Flame-Resistant Ca-Containing AZ31 Magnesium Alloy Sheets with Good Mechanical Properties Fabricated by a Combination of Strip Casting and High-Ratio Differential Speed Rolling Methods
Y. H. Kim, W. J. Kim
METALS AND MATERIALS International . 2015;21(2):374-381.   Published online 2015 February 24
382 Melt Superheating on the Microstructure and Mechanical Properties of Diecast Al-Mg-Si-Mn Alloy
Wenchao Yang, Xinliang Yang, Shouxun Ji
METALS AND MATERIALS International . 2015;21(2):382-390.   Published online 2015 February 24
391 Effect of Processing Routes in a Multi-Pass Continuous Hybrid Process on Mechanical Properties, Microstructure, and Texture Evolutions of Low-Carbon Steel Wires
Sun Kwang Hwang, Hyun Moo Baek, Ho Seon Joo, Yong-Taek Im
METALS AND MATERIALS International . 2015;21(2):391-401.   Published online 2015 February 24
402 Mechanical and Asymmetrical Thermal Properties of Al/Cu Composite Fabricated by Repeated Hydrostatic Extrusion Process
Tae-Hyuk Lee, Young-Jun Lee, Kyung-Tae Park, Ha-Guk Jeong, Jong-Hyeon Lee
METALS AND MATERIALS International . 2015;21(2):402-407.   Published online 2015 February 24
408 Finite Element Analysis of Compressive Behavior of Hybrid Short Fiber/Particle/Mg Metal Matrix Composites Using RVE Model
Si On Yim, Wook Jin Lee, Dae Hyun Cho, Ik Min Park
METALS AND MATERIALS International . 2015;21(2):408-414.   Published online 2015 February 24
415 Synthesis and Room-Temperature NO2 Sensing Properties of Sb2O5 Nanowires
Sang Sub Kim, Han Gil Na, Yong Jung Kwon, Hong Yeon Cho, Hyoun Woo Kim
METALS AND MATERIALS International . 2015;21(2):415-421.   Published online 2015 February 24
422 Preparation of a Sample with a Single MgH2 Phase by Horizontal Ball Milling and the First Hydriding Reaction of 90 wt% Mg-10 wt% MgH2
Seong-Hyeon Hong, Myoung Youp Song
METALS AND MATERIALS International . 2015;21(2):422-428.   Published online 2015 February 24
Impact factor
E-Submission
Author's Index
The Korean Institute of Metals and Materials
Springer
kofst
Editorial Office
The Korean Institute of Metals and Materials
KIM Bldg. 6th F1., Seocho-daero, 56 gil-38, Seocho-gu, Seoul 137-881, Korea
Tel: 82-70-4266-1646  Fax: 82-2-557-1080   E-mail : mmi@kim.or.kr
About |  Browse Articles |  Current Issue |  For Authors and Reviewers
Copyright © The Korean Institute of Metals and Materials (KIM) and Springer. All rights reserved.                 Developed in M2Community